Texas Instruments ISO7421D ISO7421D Digital Isolator 2 Channels 3.15 V 3.45 Soic 8 Pins

The ISO7421D is a dual-channel 1Mbps Digital Isolator, provides galvanic isolation up to 2500VRMS for 1 minute per UL. This digital isolator has two isolated channels. Each isolation channel has a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuit from entering the local ground and interfering with or damaging sensitive circuitry. This device has TTL input thresholds and require two supply voltages, 3.3 or 5V or any combination. All inputs are 5V tolerant when supplied from a 3.3V supply.

• Low power consumption, typical ICC per channel (3.3V operation) – 1.5mA
• 9ns Typical low propagation delay
• 300ps Typical low skew
• 50kV/s Typical transient immunity
• Over 25-year isolation integrity at rated voltage
• Operates from 3.3 and 5V supply and logic levels
• 3.3 and 5V Level translation
• Green product and no Sb/Br

Applications

Industrial, Communications & Networking, Motor Drive & Control, Power Management

Warnings Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Other details

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.