Sale

Atlas Sound AA200PHD 6-Input 200W Mixer Amplifier with PHD Automatic System Test

Original price was: $1,756.00.Current price is: $98.00.

(In Stock)

SKU: VC84644011892 Category:

The AA200PHD 6-Input 200W Mixer Amplifier from Atlas Sound is a 6-input channel mixer amplifier designed for distributed business paging and background music (BGM) systems, medium-to-large speech privacy systems, and in applications where music on hold (MOH) and paging is required. With four microphone/line input and two stereo line inputs, the AA200PHD Amp can accommodate a variety of input sources including paging microphones, media players, and digital music receivers.

The AA200PHD Amp includes an automatic system test, the Push Here Diagnostic (PHD). The PHD button is designed to check the connected speaker lines for wiring and impedance errors. This test can be activated once all speakers are connected and the circuit automatically verifies that the attached speakers’ tap settings do not exceed the amplifier’s rated power, no speakers are mistakenly tapped at 8 ohms, and the speaker wire is free from shorts.

The amp also incorporates a Remote Input Selection and Remote Level Control feature that allows the integrator to use the WPD-RISRL remote wall plate (not included) which lets the user select the input and adjust the volume from that wall plate up to 200 from the amplifier.

The AA200PHD Amp provides 200W output power into 25/70.7V, or 4 ohms speaker systems. Rear panel DIP switch allows for creation of Zone 2 output mix using any or all of inputs 1-4. Unit can also be set-up to mute Inputs 2 through 6 on signal from Input 1 for paging applications where other input sources need to be muted during a page. Inputs 1 to 4 are either Mic or Line input selectable and phantom power is an option when using them as a microphone input.

200W into 25/70.7V and 4 ohms loads Automated diagnostic system test (Push Here Diagnostic) Four balanced Mic/Line/Tel inputs with phantom power Three unbalanced, summing line level inputs Input assignable zone 2 output Remote Level Control Remote Input Select (RIS) Line output Preamp In for external processors Variable mute sensitivity control for Input 1 Contact closure mute terminals Rear mounted dip switch allows mute receive for inputs 2 through 6 UPC: 612079190867 In the Box Atlas Sound AA200PHD 6-Input 200W Mixer Amplifier with PHD Automatic System Test

  • Limited 3-Year Warranty
Technical
Inputs 6
Frequency Response 50 Hz to 15 kHz +/- 3 dB
THD + N 0.5% Or Less, At 1 kHz, rated output
Input Sensitivity/Impedance Input 1, 2, 3, 4 Mic Mode 5 mv, No Trim, 1200 ohms
Input 1, 2, 3, 4 Line Mode 316 mV (-10 dBV) 1200 ohms
Input 4 3.5 mm summed, 316 mV (-10 dBV) 10 kOhms
Input 5, 6 RCA unbalanced summed 316 mV (-10 dBV) 10 kOhms
Signal to Noise Ratio Mic >55 dB
Line >55 dB
Telephone >55 dB
Input 5, 6 >75 dB
Phantom Power 24 VDC
Front Panel Power Switch: Push type
Indicators: Signal, Peak, Limit, Power
PHD Test Circuit: Push momentary
Level Controls: Master, Inputs 1 to 6
Rear Panel Inputs:
Mic/Line Balanced x 4, 3-position PHX Type. 3.5 mm Pitch
Auxiliary Unbalanced x 2, RCA
Auxiliary Unbalanced x 1, 3.5 mm
Amp In: Unbalanced RCA 600 ohms

Tone Controls
Bass: 6 dB @ 100 Hz
Treble 6 dB @ 10 kHz

Mute
VOX Sensitivity: Pot Rotary, Range 500 uV to 200 mV
Remote Mute: Contact Closure, 2-position Phoenix, 3.5 mm Pitch

Remote Control Type 10 VDC return
Connector 4 Position Phoenix 3.5 mm Pitch
Control Port Input 2
Control Port Input 4, 5, 6 or Master
Supply Port 10 VDC Send
Ground Port Ground
Remote Input Type: Ground activated
Connector: 4-position Phoenix 3.5 mm pitch
Inputs Controlled: 4, 5, 6
Control Switch Zone 2 Assign: Inputs 1, 2, 3, 4
Mute Receive: Inputs 1, 2, 3, 4, 5, 6
Phantom Power: Inputs 1, 2, 3, 4
Mic/Line Select: Inputs 1, 2, 3, 4
Remote Level: Assigned Master or Inputs 4, 5, 6
RIS: On/Off
Power Requirements
Required AC Mains 120 V, 60 Hz
AC Cord 2M, 16 gauge, NEMA 5 to 20P
Idle Power 0.18 A, 21 W, 73 BTU
Average Power Requirements 2.9 A, 348 W, 1187 BTU
Maximum Power 4.5 A, 540 W, 1842 BTI
Outputs
Mains Transformer coupled, balanced, 4 ohms, 25 V, and 70.7 V. Class 2 Rated, Removable 4 Position PHX
5.08 mm pitch, accepts up to 12-gauge wire, 12 A rating
Zone 2 Audio Output Unbalanced 600 ohms / 10 kOhms, Maximum 1 V Out, Removable 2-Position PHX 3.50 mm Pitch
Accepts Up to 18-gauge Wire, 8 A rating
Pre-Out RCA, unbalanced 150 ohms
Chassis Steel
Compliance RoHS Compliant, ETL (UL 60065 Standard)
Dimensions 17 x 3.7 x 15″ (42 x 9.3 x 42 cm)
Weight 26 lb (12 kg)
Packaging Info
Package Weight 30.65 lb
Box Dimensions (LxWxH) 19.8 x 17.2 x 7.3″

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Reviews

There are no reviews yet.

Be the first to review “Atlas Sound AA200PHD 6-Input 200W Mixer Amplifier with PHD Automatic System Test”

Your email address will not be published. Required fields are marked *

6
$61.63